Preliminary Investigation on Enhanced Hydrogen Generation via Carbon Nanodots–Sulfonated Polyoctahedral Silsesquioxane Layer Modified Anode in Water Electrolysis
DOI:
https://doi.org/10.11113/jamst.v29n3.332Keywords:
Carbon Nanodots (CND), Sulfonated Polyoctahedral Silsesquioxane (SPOSS), Anode Layers, Alkaline Water Electrolysis, Hydrogen GenerationAbstract
This study investigated the preliminary electrochemical performance of carbon anodes coated with a composite of Carbon Nanodots (CND) and Sulfonated Polyoctahedral Silsesquioxane (SPOSS) for water electrolysis. The coatings were applied in varying ratios of CND to SPOSS (1:0, 1:1, 0:1) and at different layer thicknesses (3 and 5 layers) simulating membrane-like interfaces for enhanced electrode–electrolyte interaction. Electrochemical performance was evaluated through hydrogen production rates in a 2 wt% NaOH electrolyte. Scanning Electron Microscopy (SEM) was used to confirm the uniformity and integrity of the coatings, while UV-Vis Spectroscopy was employed to assess any potential leaching of coating materials into the electrolyte. Results indicated that electrodes coated with CND:SPOSS (1:1) modification with three coating layers improved both catalytic activities, achieving the highest hydrogen production rate of 0.51 cm³/s. Excessive coating thickness, particularly at five layers, led to aggregation observed in the SEM images, which resulted in a reduced hydrogen production rate and overall performance. The 3-layer CND:SPOSS (1:1) coating is optimal for hydrogen production performance due to its uniform, crack-free structure and enhanced electrochemical activity, while the 3-layer CND:SPOSS (0:1) coating is best for minimizing leaching, as it shows the least absorbance increase. These preliminary findings highlight the potential of nanocarbon-based surface modification as a membrane-inspired strategy to enhance hydrogen production efficiency in alkaline water electrolysis systems.
References
Tang, Y., Zhang, T., Wu, X., & Deng, S. (2022). Active sites regulation for high-performance oxygen evolution reaction electrocatalysts. Frontiers in Chemistry, 10, Article 889470.
Arshad, F., Gondal, M. A., Mustaqeem, M., Tahir, A., & Zulfiqar, F. (2026). Energy-efficient electrochemical hydrogen production from seawater: A review of chemical-assisted splitting technologies. Fuel, 403, 136107.
Marquez, R. A., Esponosa, M., Kalokowski, E., Son, Y. J., Kawashima, K., Le, T. V., Chukwuneke, C. E., & Mullins, C. B. (2024). A guide to electrocatalyst stability using lab-scale alkaline water electrolyzers. Energy & Environmental Materials, 9(2), 547–555.
Zhai, Q., Pan, Y., & Dai, L. (2021). Carbon-base metal-free electrocatalysts: Past, present, and future. Accounts of Materials Research, 2(12), 1239–1250.
Mabhulusa, W., Sekhosana, K. E., & Fuku, X. (2024). The impact and performance of carbon-supported platinum group metal electrocatalysts for fuel cells. International Journal of Electrochemical Science, 19(4), 100524.
Mansuriya, B. D., & Altintas, Z. (2021). Carbon dots: Classification, properties, synthesis, characterization, and applications in health care—An updated review (2018–2021). Nanomaterials, 11(10), 2525.
Wang, T., He, J., Sun, D., Guo, Y., Ma, Y., Hu, Y., Li, G., Xue, H., Tang, J., & Sun, X. (2011). Synthesis of mesoporous carbon-silica-polyaniline and nitrogen containing carbon-silica films and their corrosion behavior in simulated proton exchange membrane fuel cells environment. Journal of Power Sources, 196(22), 9552–9560.
Liu, H., Xing, F., Zhou, Y., Yu, P., Xu, J., Luo, R., Xiang, Z., Rommens, P. M., Liu, M., & Ritz, U. (2023). Nanomaterials-based photothermal therapies for antibacterial applications. Materials & Design, 233, 112231.
Idris, A. O., Orimolade, B. O., Mafa, P. J., Kuvarega, A. T., Feleni, U., & Mamba, B. B. (2022). Carbon-nanodots modified glassy carbon electrode for the electroanalysis of selenium in water. Results in Chemistry, 4, 100394.
Freire, B. R. L., Monteiro, M. D. S., Silva, J. de O. S., de Macedo, J. F., & Sussuchi, E. M. (2023). Development of a modified electrode with N-doped carbon dots for electrochemical determination of 17α-ethinylestradiol. Brazilian Journal of Analytical Chemistry, 44(2023). https://doi.org/10.30744/brjac.2179-3425.AR
Zhou, H., Ye, Q., & Xu, J. (2017). Polyhedral oligomeric silsesquioxane-based hybrid materials and their applications. Royal Society of Chemistry, 1, 212–230.
Zhang, S., Chen, W., Hao, W., Li, D., Zhang, C., Yu, F., & Chen, Y. (2024). A composite gel polymer electrolyte by incorporating modified POSS endowing inorganic-rich SEI formation and stable cycle life for lithium metal batteries. Chemical Engineering Journal, 484, 149499.
Bai, Z., Tu, W., Zhu, J., Li, J., Deng, Z., Li, D., & Tang, H. (2019). POSS-derived synthesis and full life structural analysis of Si@C as anode material in lithium ion battery. Polymers, 11(4), 576. https://doi.org/10.3390/polym11040576
Mohamad Nor, N. A., Mohamed, M. A., & Jaafar, J. (2022). Modified sulfonated polyphenylsulfone proton exchange membrane with enhanced fuel cell performance: A review. Journal of Industrial and Engineering Chemistry, 116, 32–59.
Min, K., Al Munsur, A. Z., Paek, S. Y., Jeon, S., Lee, S. Y., & Kim, T.-H. (2023). Development of high-performance polymer electrolyte membranes through the application of quantum dot coatings to Nafion membranes. ACS Applied Materials & Interfaces, 15(12).
Vinothkannan, M., Kim, A. R., & Yoo, D. J. (2021). Potential carbon nanomaterials as additives for state-of-the-art Nafion electrolyte in proton-exchange membrane fuel cells: A concise review. RSC Advances, 11, 18351–18370. https://doi.org/10.1039/D1RA00685A
Mohamad Nor, N. A., Nakao, H., Jaafar, J., & Kim, J.-D. (2020). Crosslinked carbon nanodots with highly sulfonated polyphenylsulfone as proton exchange membrane for fuel cell applications. International Journal of Hydrogen Energy, 45(16), 9979–9988.
Mohamad Nor, N. A., Jaafar, J., & Kim, J.-D. (2020). Improved properties of sulfonated octaphenyl polyhedral silsequioxane cross-link with highly sulfonated polyphenylsulfone as proton exchange membrane. Journal of Solid State Electrochemistry, 4(5), 1185–1195.
Macías, J. D., Bante-Guerra, J., Cervantes-Alvarez, F., Rodrìguez-Gattorno, G., & Arés-Muzio, O. (2019). Thermal characterization of carbon fiber-reinforced carbon composites (C/C). Applied Composite Materials, 26(1).
Orozco-Barrera, S., Iglesias, G. R., Delgado, Á. V., García-Larios, S., & Ahualli, S. (2023). Effects of layer-by-layer coating on activated carbon electrodes for capacitive deionization. Physical Chemistry Chemical Physics, 25(13), 9482–9491.
Zhao, Z., Chen, H., Zhang, W., Yi, S., Chen, H., Su, Z., Niu, B., Zhang, Y., & Long, D. (2023). Defect engineering in carbon materials for electrochemical energy storage and catalytic conversion. Materials Advances, 4, 835–867.
Pille, R., Inga, P., Veronika, Z., Urmas, J., Tarmo, T., Kaija, P. E., Andres, P., van den E. D., & Alvo, A. (2022). Dip-coating electromechanically active polymer actuators with SIBS from midblock-selective solvents to achieve full encapsulation for biomedical applications. Scientific Reports, 12, 21589.
Hamid, R. B., Florian, N., Tiva, S., Madeleine, R., Cheuk, W. T., Artur, M., Lesvek, S., & Thomas, W. (2012). Simple dip-coating process for the synthesis of small diameter single-walled carbon nanotubes—Effect of catalyst composition and catalyst particle size on chirality and diameter. Journal of Physical Chemistry C, 116(22), 12232–12239.
Chen, G., Zhu, Y., She, S., Lin, Z., Sun, H., & Huang, H. (2024). Component leaching of water oxidation electrocatalysts. InfoMat, 6(11).
Fan, Z., Guo, X., Jin, Z., Li, X., & Li, Y. (2022). Bridging effect of S–C bond for boosting electron transfer over cubic hollow CoS/g-C3N4 heterojunction toward photocatalytic hydrogen production. Langmuir, 38(10), 3244–3256.
Luong, T. N., Doan, T. L. L., Bacirhonde, P. M., & Park, C. H. (2025). Synthesis of an advanced electrocatalyst based on high-conductive carbon nanofibers shelled NiFe2O4 nanorods for oxygen evolution reaction. International Journal of Hydrogen Energy, 99, 1108–1118.
Kang, D. W., Song, J. H., Lee, K. J., Kim, J. E., Lee, H. Y., Kim, J. Y., & Hong, C. S. (2017). A conductive porous organic polymer with superprotonic conductivity of a Nafion-type electrolyte. Journal of Materials Chemistry A, 5, 17492–17498.
Wu, H., Lu, S., & Yang, B. (2022). Carbon dot enhanced electrocatalytic hydrogen evolution. Accounts of Materials Research, 3(3), 319–330.
Grammatico, D., Lichtenberger, J., Kern, H., Krammer, M., Pichler, C. M., Kogler, M., & Dimopoulos, T. (2025). Surface modification of sputtered thin-film silver electrodes for sustainable and highly efficient electroreduction of CO₂ to CO. ACS Applied Energy Materials, 8(12), 7974–7983.
Downloads
Published
How to Cite
Issue
Section
License
Copyright of articles that appear in Journal of Applied Membrane Science & Technology belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
