Grand Challenges in Membrane Process for Gas Separation

Authors

  • Wong Shei Ming Department of Chemical and Energy Engineering, Faculty of Engineering and Science, Curtin University Malaysia, 250 CDT, 98009 Miri, Sarawak, Malaysia
  • Zeinab Abbas Jawad Department of Chemical Engineering, College of Engineering, Qatar University, P.O.Box: 2713, Doha, Qatar
  • Mohammad Qasim Department of Medical Biochemical Analysis, Cihan University, Erbil, Iraq

DOI:

https://doi.org/10.11113/amst.v26n2.240

Keywords:

Membrane separation, fabrication method, modification techniques

Abstract

Membrane technology is the most promising technology in the post-combustion capture technology compared to absorption, adsorption and cryogenic distillation methods. It is an advanced new technology for recovery of carbon dioxide. It has several advantages when compared to other methods due to its’ simple process, low cost, lower footprint, sustainable environment and energy saving method. The challenge is the fabrication method of the polymeric membrane, and it depends on the particular utilisation of the membrane. Different morphologies of the membrane structure can be produced using different methods.

References

Ali Kargari and Sheida Rezeinia. 2019. State of the Art Modification of Polymeric Membrane by PEO and PEG for Carbon Dioxide Separation: A Review of the Current Status and Future Perspectives. J Ind Eng Chem. 84(25): 1-22. https://doi.org/10.1016/j.jiec.2019.12.020.

Yutao Liu et al. 2020. Multifunctional Covalent Organic Gramework (COF)- Based Mixed Matrix Membranes for Enhanced CO2 Separation. J. Membr. Sci. 618: 118693. https://doi.org/10.1016/j.memsci.2020.118693.

Nidhika Bhoria et al. 2020. Composite Porous Nanostructures as Multi-action Adsorbents and Membrane Fillers for Carbon Dioxide Separation: Comparative Performance of Metal Organic Framework – Grapheme Oxide Hybrids. Mater. Today: Proc. https://doi.org/10.1016/j.matpr.2020.07.466.

Sogolzadeh Mohammad, Mansooreh Soleimani, Maryam Takht Ravnachi, and Reze Songolzaeh. 2014. Carbon Dioxide Separation Form Flue Gases: A Technological Review Emphasizing Reduction in Greenhouse Gas Emissions. Sci. World J.

https://doi.org/10.1155/2014/828131.

Wonji Jung et al. 2018. Water Membrane for Carbon Dioxide Separation. Sep. Purif. Technol. 203: 268-273.

https://doi.org/10.1016/j.seppur.2018.04.054.

Samaneh Bandehali et al. 2019. Advances in High Carbon Dioxide Separation Performance of Poly (ethylene oxide)-based Membranes. J. Energy Chem. 46: 30-52.

https://doi.org/10.1016/j.jechem.2019.10.019.

Xavier Duthie et al. 2007. Operating Temperature Effects on the Plasticisation of Polyimide Gas Separation Membranes. J. Membr. Sci. 294(1-2): 40-49.

https://doi.org/10.1016/j.memsci.2007.02.004.

L. M. Robeson. 2008. The Upper Bound Revisited. J. Membr. Sci. 320: 390-400.

https://doi.org/10.1016/j.memsci.2008.04.030.

Kar Kit Wong and Zeinab Abbsa Jawad. 2019. A Review and Future Prospect of Polymer Blend Mixed Matrix Membrane for CO2 Separation. J. Polym. Res. https://doi.org/10.1007/s10965-019-1978-z.

Wan Chin Cha and Zeinab. 2019. The Influence of Cellulose Acetate Butyrate Membrane Structure on CO2/N2 Separation: Effect of Casting Thickness and Solvent Exchange Time. Chem Eng Commun.

https://doi.org/10.1080/00986445.2019.1605359.

E. M. Awad et al. 2020. Strong Etching Investigation on PADC CR-39 as a Thick Track Membrane with Deep Depth Profile Study. Radiat. Phys. Chem. 177: 109104. https://doi.org/10.1016/j.radphyschem.2020.109104.

Jingqian Zhou et al. 2008. Morphology Evolution Of Thickness-gradient Membranes Prepared by Wet-phase Inversion Process. Sep. Purif. Technol. 63(2): 484-486.

https://doi.org/10.1016/j.seppur.2008.05.019.

Wei Deng and Ying Li. 2020. Novel Super Hydrophilic Antifouling PVDF-BiOCl Nanocomposite Membranes Fabricated via A Modified Blending-phase Inversion Method. Sep. Purif. Technol. 254: 117656.

https://doi.org/10.1016/j.seppur.2020.117656.

Farzad Rayekan Iranagh et al. 2020. Dispersion Engineering of MWCNT to Control Structural and Gas Transport Properties of PU Mixed Matrix Membranes. J. Environ. Chem. Eng. 8(6): 104493. https://doi.org/10.1016/j.jece.2020.104493.

Wai Fen Yong and Hao Zhang. 2020. Recent Advances in Polymer Blend Membranes for Gas Separation and Evaporation. Prog. Mater. Sci. https://doi.org/10.1016/j.pmatsci.2020.100713.

Yuanyuan Wang et al. 2014. Enhancing Membrane Permeability for CO2 Capture through Blending Commodity Polymers with Selected PEO and PEO-PDMS Copolymers and Composite Hollow Fibres. Energy Procedia. 34: 202-209. https://doi.org/10.1016/j.egypro.2014.11.021.

S. Quan et al. 2016. PEG-imbedded PEO Membrane Developed by a Novel Highly Efficient Strategy Toward Superior’s Gas Transport Performance. Macromol. Rapid Commun. 36(5): 490-495. https://doi.org/10.1002/marc.201400633.

Downloads

Published

2022-07-25

How to Cite

Shei Ming, W. ., Jawad, Z. A., & Qasim, M. . (2022). Grand Challenges in Membrane Process for Gas Separation. Journal of Applied Membrane Science & Technology, 26(2), 43–48. https://doi.org/10.11113/amst.v26n2.240

Issue

Vol. 26 No. 2: August 2022

Section

Articles

License

Copyright of articles that appear in Journal of Applied Membrane Science & Technology belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.